new block is already built up. 306 with all forged internals. Ported heads and port matched intake. Aught to run alright. May tune it for 24lb injectors just to see. Also slapped some 1.7 rocker arms on it
OK nice one.
Watch the injector size and it should be dependent on your Throttle Body size.
What cam did you put in, hopefully not the 303 Stang cam, there are so many so much better.
Make sure to get an EFI Cam, lobe separation is different on the EFI versus a carb’d cam.
I never liked the 1.7 Rocker Arms, if/when you buy a cam you can get all of the lift you need designed in the cam lobes.
My cam is a short duration around 268, I think , will have to look that up, and the lift is 510 and 512 @ .050 lift.
Hopefully this will let the engine breath better and produce not only more low end torque but more higher end HP.
I know almost the same thing as adding the higher ratio rockers but when you buy the cam kit and all of the parts as a kit you get everything machined to work together.
Just me, good luck on the new engine.
Is there a build thread on this ?