RCD Lift Kit

Discussion in 'General Discussion' started by Hurley, Feb 3, 2012.

  1. kozal01

    kozal01 New Member

    Depends on your skill level really. There is a little welding involved but other than that its pretty straight forward.
     
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. OP
    Hurley

    Hurley Superultramegalurker

    Did you run into any problems?
     
  4. kozal01

    kozal01 New Member

    No, everything went rather smoothly. My truck only had around 30,000 on it when I lifted it so all the bolts came out easily and there was no rust on the parts. If yours has a few miles on it I would start soaking the bolts that will need to be removed with PB blaster a week or so before you do the lift.
     
  5. OP
    Hurley

    Hurley Superultramegalurker

    About how long did it take you and is it a two man job?
     
  6. kozal01

    kozal01 New Member

    I dont really remember how long it took, I did it about 6 years ago. lol A second set of hands would be helpful.
     
  7. I'll help ya out Hurley. And I'm sure Brad and Clinton would come out too, but I ain't speaking for them lol
     
  8. OP
    Hurley

    Hurley Superultramegalurker

    I think I'm gonna wait till spring. I could use all the help I can get. Thanks for all the advice kozal, I really appreciate it
     
  9. kozal01

    kozal01 New Member

    No problem! You got the lift though right? Just going to wait to install it?
     
  10. OP
    Hurley

    Hurley Superultramegalurker

    Yeah I got it. It seems to be all there. Is this more of a weekend project? Cuz I have access to a garage with a lift but its only after hours so I couldn't leave the truck there, it would have to done in one shot
     
  11. kozal01

    kozal01 New Member

    Yeah id give yourself a couple days to do it so you can take your time with it.
     
  12. OP
    Hurley

    Hurley Superultramegalurker

    Ok then in that case I'm gonna wait til spring
     
  13. Fx4wannabe01

    Fx4wannabe01 New Member

    When Trevor's went, it was very similar to yours. 2wd wasn't that bad since there's no power, but 4wd and 2' of snow on the ground, proved him to have a broken truck til it was fixed. lol. 4wd that thing rattled and slapped and shook steering wheel and wore a hardcore groove in the rear x-member...

    (fix-it pics below)

    [​IMG]


    Never have I ever heard that about any 98+ IFS Ranger. It's near impossible....the passenger side bracket helps prevent the axle from rotating that much. Only thing I see under there that could possibly cause "blowing holes in the diff" would be to drop the truck on a chunk of rebar sticking up....you know, Cable Guy death style. lol.

    Having installed 3 superlifts, granted they're not RCD's but similar in install, and removed and worked on 1 RCD, it's pretty straight forward. The hardest part of the job was unloading the bars safely without the proper tooling and fishing that diff in and out. The welding part may be difficult for you depending on experience and what kind of friends you've got. Took myself and two others about 6 hours to install the first, 5 for the second, 4 for the third.

    You may be able to download the instructions still from somewhere. Or I may even have them in a pdf file somewhere. I'll take a peek in the externals for ya. I know you can download Superlift instructions...those'll give you a good idea for a how-to.

    And here's another way to reinforce it that bracket...

    [​IMG]

    [​IMG]
     
  14. loooks like that would work great
     
  15. OP
    Hurley

    Hurley Superultramegalurker

    Thanks! If you do have the instructions I would be really grateful if you would send em to me
     
  16. Fx4wannabe01

    Fx4wannabe01 New Member

    Hurley...

    Shoot me a PM with your email addy... And please be sure to mention why I need your email. I'm likely to space it and forget all about what I'm sending you. haha.
     
  17. OP
    Hurley

    Hurley Superultramegalurker

    Pm sent
     

Share This Page