Want to buy: Washer bottle

Its for the 4.0 SOHC, i dentical to mine here
enginedetail.jpg
 
Hooligan said:
So I take it you have a different one?
Click to expand...

No.The one you have is what I am looking for. I was just educating people on the different washer bottles in a Ranger. I am curious why Ford changed the design on the 4 cyl.
I have a 3.0.
Does anyone have the 2 part 4cyl design that they could measure for me?? Especially the round overflow bottle. It looks taller and the extra height may be helpful for my mod.
 
Last edited:
My plans have changed a bit. The v6 bottle is too short. Anyone have the 2 part set from a later 4 cyl? The overflow is round.
 
The round coolant over-flow bottle and windshield washer bottle assembly is found on 2.3L Duratec Rangers. 2001.5-2012. It is a two piece design where as the 3.0 and 4.0 and older 2.5L/2.3L 4cyl models are two tanks molded into one piece. As far as interchange possibility, I don't see Ford making special studs on the inner fender structure just for 4cyl models....I don't see why doing a complete tank(s) swap isn't possible.

Found this on eBay...

http://www.ebay.com/itm/NEW-OEM-200...-Overflow-Reservoir-Tank-Bottle-/251244652969

and this...

http://www.ebay.com/itm/NEW-OEM-RAD...-RANGER-2002-2011-2L5Z-8A080-AA-/360492889981
 
I am pretty sure it will bolt on easily. I'm not real concerned about that. I already have the crescent shaped washer bottle. I need the round overflow bottle to work on my heating element. The 4cyl set is larger than the 6cyl bottle assembly. I need the extra room for the heating element. I did find quite a few new bottles on fleabay. I don't plan on spending roughly $80 for the thing. I want a used one for a reasonable price.
 
You must log in or register to reply here.
Back
Top