Join RangerForum.com Today - It's Totally Free! Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online. Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free! Join RnagerForum.com Today!
Not on all years. The later ones have a 2 piece deal. The overflow bottles are round. I still can't figure why? http://www.ebay.com/itm/2007-2011-FORD-RANGER-2-3L-COMPLETE-ENGINE-57K-W-WARRANTY-/140827096500?pt=Motors_Car_Truck_Parts_Accessories&hash=item20c9f2f5b4&vxp=mtr
No.The one you have is what I am looking for. I was just educating people on the different washer bottles in a Ranger. I am curious why Ford changed the design on the 4 cyl. I have a 3.0. Does anyone have the 2 part 4cyl design that they could measure for me?? Especially the round overflow bottle. It looks taller and the extra height may be helpful for my mod.
My plans have changed a bit. The v6 bottle is too short. Anyone have the 2 part set from a later 4 cyl? The overflow is round.
The round coolant over-flow bottle and windshield washer bottle assembly is found on 2.3L Duratec Rangers. 2001.5-2012. It is a two piece design where as the 3.0 and 4.0 and older 2.5L/2.3L 4cyl models are two tanks molded into one piece. As far as interchange possibility, I don't see Ford making special studs on the inner fender structure just for 4cyl models....I don't see why doing a complete tank(s) swap isn't possible. Found this on eBay... http://www.ebay.com/itm/NEW-OEM-200...-Overflow-Reservoir-Tank-Bottle-/251244652969 and this... http://www.ebay.com/itm/NEW-OEM-RAD...-RANGER-2002-2011-2L5Z-8A080-AA-/360492889981
I am pretty sure it will bolt on easily. I'm not real concerned about that. I already have the crescent shaped washer bottle. I need the round overflow bottle to work on my heating element. The 4cyl set is larger than the 6cyl bottle assembly. I need the extra room for the heating element. I did find quite a few new bottles on fleabay. I don't plan on spending roughly $80 for the thing. I want a used one for a reasonable price.