Discussion in 'Ranger Forum Classifieds' started by Shawn, Oct 15, 2012.
Later 4 cyl ROUND..Radiator overflow bottle..
Join RnagerForum.com Today!
I got the washer/anti freeze bottle. It's like new if you're interested.
How much? 4cyl or v6?
Its for the 4.0 SOHC, i dentical to mine here
IIRC ford uses the same for 4 and 6cyl engines...
Not on all years. The later ones have a 2 piece deal. The overflow bottles are round. I still can't figure why?
So I take it you have a different one?
No.The one you have is what I am looking for. I was just educating people on the different washer bottles in a Ranger. I am curious why Ford changed the design on the 4 cyl.
I have a 3.0.
Does anyone have the 2 part 4cyl design that they could measure for me?? Especially the round overflow bottle. It looks taller and the extra height may be helpful for my mod.
Ok, PM me of you want to buy it
My plans have changed a bit. The v6 bottle is too short. Anyone have the 2 part set from a later 4 cyl? The overflow is round.
Bump...I still need the round overflow bottle..
The round coolant over-flow bottle and windshield washer bottle assembly is found on 2.3L Duratec Rangers. 2001.5-2012. It is a two piece design where as the 3.0 and 4.0 and older 2.5L/2.3L 4cyl models are two tanks molded into one piece. As far as interchange possibility, I don't see Ford making special studs on the inner fender structure just for 4cyl models....I don't see why doing a complete tank(s) swap isn't possible.
Found this on eBay...
I am pretty sure it will bolt on easily. I'm not real concerned about that. I already have the crescent shaped washer bottle. I need the round overflow bottle to work on my heating element. The 4cyl set is larger than the 6cyl bottle assembly. I need the extra room for the heating element. I did find quite a few new bottles on fleabay. I don't plan on spending roughly $80 for the thing. I want a used one for a reasonable price.
Separate names with a comma.