The Ranger :: 2006 Ford Ranger
- Thread starter 06FordFX4
- Start date
timbits588
New Member
more pictures!!! nice truck
06FordFX4
Canadian Redneck
ok, gonna copy paste this from another site im on.
Alright, not really a "build" thread as I'm not planning any major mods right now. Few months I'll have tires/wheels/body lift, but that wont be for a while.
Stock Specs:
2006 Ford Ranger FX4 Level II
Polished alcoa's
31x10.50 tires
4.0 SOHC
Mods done:
Fog light Mod. Allows fog lights to be on with high beams.
K&N drop in air filter
Reflex Wiper Blades
LED tail lights/reverse lights
32x11.50x15 Falken Wildpeak AT's
15x8 pro comp series 52 wheels
MBRP turndown exhaust
Superchips flashpaq tuner
Planned mods:
Black headlights with HID projectors.
black billet grille
Pictures:
Day after picked up from dealer.
Removed the steps
Decided to flex it out and see what she's got stock. Pretty damn good imo
Then I cleaned her up nice and shiny
New tires on!
so freaking smooth on pavement, and quiet to.
and on gravel they grip incredibly well compared to my old tires. minimal spinning, and great breaking performance.
had them in a bit of sand, very fine and loose. not packed at all. with my old tires I had to use 4x4 to get around in it. with these tires 2wd works fine. which is nice.
have yet to test em extensivly in sand and rock though, but from the little bit i did have em in, they work great.
heres a few pics.
and just to test if they rears rub at flex i went and tested it
they clear the fender flares on the inside by about 1/8" so its perfect. i love em. they pocket in the wheel well nicely.
Alright, not really a "build" thread as I'm not planning any major mods right now. Few months I'll have tires/wheels/body lift, but that wont be for a while.
Stock Specs:
2006 Ford Ranger FX4 Level II
Polished alcoa's
31x10.50 tires
4.0 SOHC
Mods done:
Fog light Mod. Allows fog lights to be on with high beams.
K&N drop in air filter
Reflex Wiper Blades
LED tail lights/reverse lights
32x11.50x15 Falken Wildpeak AT's
15x8 pro comp series 52 wheels
MBRP turndown exhaust
Superchips flashpaq tuner
Planned mods:
Black headlights with HID projectors.
black billet grille
Pictures:
Day after picked up from dealer.
Removed the steps
Decided to flex it out and see what she's got stock. Pretty damn good imo
Then I cleaned her up nice and shiny
New tires on!
so freaking smooth on pavement, and quiet to.
and on gravel they grip incredibly well compared to my old tires. minimal spinning, and great breaking performance.
had them in a bit of sand, very fine and loose. not packed at all. with my old tires I had to use 4x4 to get around in it. with these tires 2wd works fine. which is nice.
have yet to test em extensivly in sand and rock though, but from the little bit i did have em in, they work great.
heres a few pics.
and just to test if they rears rub at flex i went and tested it
they clear the fender flares on the inside by about 1/8" so its perfect. i love em. they pocket in the wheel well nicely.
06FordFX4
Canadian Redneck
next few things i did.
plasti-dipped the grille and hood bulge. Looks really good in person. however thanks to the wind kicking up dust when it dried, it looked likt **** thanks to the dust landing in it while wet, so i peeled the plasti dip off. but now i know I like the look, and can have it viny wrapped later.
Bedlined the wheel wells
New tires throw up rocks so this protects and prevents that annoying sound of rock on metal.
installed cheap ass lights
found a better spot to test the flex
rubs on the front of the flare. any more and it would have started ripping it off.
then i bedlined a piece of angle iron and bolted it onto the lights. now have a legit light bar to bolt more lights onto, and it looks better, also sits right on the bumper so its 100% sturdy and no bouncing lights anymore
and the last thing ive done i think is moving the lights to the back, facing rear wards. lights up the bed. gets dark stupid early, and i like being able to see when im loading/unloading.
plasti-dipped the grille and hood bulge. Looks really good in person. however thanks to the wind kicking up dust when it dried, it looked likt **** thanks to the dust landing in it while wet, so i peeled the plasti dip off. but now i know I like the look, and can have it viny wrapped later.
Bedlined the wheel wells
New tires throw up rocks so this protects and prevents that annoying sound of rock on metal.
installed cheap ass lights
found a better spot to test the flex
rubs on the front of the flare. any more and it would have started ripping it off.
then i bedlined a piece of angle iron and bolted it onto the lights. now have a legit light bar to bolt more lights onto, and it looks better, also sits right on the bumper so its 100% sturdy and no bouncing lights anymore
and the last thing ive done i think is moving the lights to the back, facing rear wards. lights up the bed. gets dark stupid early, and i like being able to see when im loading/unloading.
06FordFX4
Canadian Redneck
ok, so,future plans include a backrack, pictured below.
an LED lightbar for the front, probably located in the lower grille opening, so its practically invisible till its turned on.
and thats probably it. other than regular maintennance stuff.
engine has a ticking to it, several folks ive asked say its 99% most likely the timing chain guide wore out. and with the 4.0 you gotta remove the engine to do the back one. which i want to put off as long as possible. im not made of money lol.
so if i can make it last long enough to make spare cash to have it fixed, great. if not, its going to be 5.0 time.
honestly... im kinda hoping to go the 5.0 route. if i gotta pull the 4.0 anyways, why not drop in a 5.0, right?
an LED lightbar for the front, probably located in the lower grille opening, so its practically invisible till its turned on.
and thats probably it. other than regular maintennance stuff.
engine has a ticking to it, several folks ive asked say its 99% most likely the timing chain guide wore out. and with the 4.0 you gotta remove the engine to do the back one. which i want to put off as long as possible. im not made of money lol.
so if i can make it last long enough to make spare cash to have it fixed, great. if not, its going to be 5.0 time.
honestly... im kinda hoping to go the 5.0 route. if i gotta pull the 4.0 anyways, why not drop in a 5.0, right?
Last edited:
06FordFX4
Canadian Redneck
long term plans are either an SAS, or long travel setup. havent decided, but have many years to decide. as it wont happen till the ranger is retired from DD status.
but, the end goal would be to run 35's and be a capable offroader. wether it be slow technical stuff, or high speed and jumpin **** lol.
but, the end goal would be to run 35's and be a capable offroader. wether it be slow technical stuff, or high speed and jumpin **** lol.
JustinRanger96
justinranger96
nice truck man! and lots of good pics. she flexes good!
06FordFX4
Canadian Redneck
if it does come out, it wont be for a long time haha. it still has the tick, but now that its betting warmer its not as noticeable. still dont know for sure 100% what it is, but i havent really been checking either.
short term plans have been decided.
before the end of summer the following will be done.
12" Sub + 5 channel amp.
body lift
33x12.50 falken wildpeaks (love these tires)
and, another hopeful mod, but will depend on cash, is getting the flares, bumpers, rockers, basically everything that is grey, line-x'd
short term plans have been decided.
before the end of summer the following will be done.
12" Sub + 5 channel amp.
body lift
33x12.50 falken wildpeaks (love these tires)
and, another hopeful mod, but will depend on cash, is getting the flares, bumpers, rockers, basically everything that is grey, line-x'd
06FordFX4
Canadian Redneck
replaced the drivers side sway bar link I broke back in the summer of 2012.
had it off, didn't like the handling on road. When I went to put it back on, the bolt snapped and wouldn't tighten. so i finally replaced it today. got a killer deal on a new link from a local classified ad.
few pictures.
Old link:
New Link:
Old Link, you can see how much extra space there is.
New link. All tight
New vs old
where you see the cuts on the old link is where i cut the outer plastic to free up the bolt. it was stuck inside the plastic piece. which im lucky that happened or id have been stuck without a link in there since last summer lol.
had it off, didn't like the handling on road. When I went to put it back on, the bolt snapped and wouldn't tighten. so i finally replaced it today. got a killer deal on a new link from a local classified ad.
few pictures.
Old link:
New Link:
Old Link, you can see how much extra space there is.
New link. All tight
New vs old
where you see the cuts on the old link is where i cut the outer plastic to free up the bolt. it was stuck inside the plastic piece. which im lucky that happened or id have been stuck without a link in there since last summer lol.
