doyouquaxu
FUUUUUUUUUUUUU
Giant 64" Leaf Spring kit for Ford Rangers. The kit has been mocked up on one truck, the guy I bought the kit from said there is a possibly of being driven on the street a few miles before being taken off. Since then, I took the springs to Deaver for a full prep including new hardware and bushings, and their famous black paint/tar coating. The springs are essentially NEW, prep was only needed because they had been sitting for awhile in my garage. The hangers, shackles, and spring plates have all recently been powder coated gloss black. I also have a 2 piece drive shaft from an 86 Ranger (carrier bearing mount needs to be made to run this). It measures 73" over all with a 4" slip yoke. 24" from the end of the slip yoke to the center of the carrier bearing mount, 49 1/8" from the carrier mount to the axle mount. I also have a pair of spring perches, they should work on a 31 spline 8.8. I also have 2 18" Kartek limit straps with adjustable clevises and weld on mounts, u-bolts, and ALL necessary grade 8 hardware to mount the kit (hardware has been used for mock up). The bushings for the shackles are included as well, I just didn't install them for the pics after getting everything back from powder coat.
$1500.
$1500.
