Coil over information

Discussion in 'Suspension Tech' started by Hooligan, May 6, 2013.

  1. Hooligan

    Hooligan Rangerholic!!

    I am doing the coil over swap and looking for some help. If anyone has any tips on the install with pics **coughFX4Wannabe01** please throw it in here!

    Pics of setups, welds for gussets and anything else pertaining to it would be helpful!


    Also, I could use some inout on removing the torsion bars as well. I am doing this solo, so all input would help!
     
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. camodown

    camodown Member

    I gave some advice on trs.

    There is a big thread on rf when we did mine. Some of the pics I think are gone though since it was from 09 or so.
     
  4. camodown

    camodown Member

    You can rent a gear puller from auto zone if you want to do it right or just the bottle jack.
     
  5. OP
    Hooligan

    Hooligan Rangerholic!!

    I replied on TRS, Thanks! I just need to know how to take the torsion bars off and whatever else I can get my hands on!
     
  6. joshyddog

    joshyddog New Member

    Hey heard you bought a coil over set. If you are selling let me know!
     
  7. Scrambler82

    Scrambler82 Old Guy User

    [​IMG]

    [​IMG]

    [​IMG]

    That’s all folks !
     
  8. OP
    Hooligan

    Hooligan Rangerholic!!

    ^^ I HEART you man! Thanks!





    lol
     
  9. Scrambler82

    Scrambler82 Old Guy User

    OK !

    For some reason those are the only pictures I can find of the swap over.
    I did it the same time as the SuperLift and new rear springs.

    If I come up with more pics I will post.
     
  10. OP
    Hooligan

    Hooligan Rangerholic!!

    They are perfect dude! The welds and upper mount is what I was wondering about, other than that, location on the bottom baracket and what you used to drill the steel would be a huge help!
     
  11. Scrambler82

    Scrambler82 Old Guy User

    As I said no more pics, I will look.
    The drill was standard drills but I alway drill using 3 step, 3 different sized drills.
     
  12. OP
    Hooligan

    Hooligan Rangerholic!!

    Roger that....I appreciate what you have put up though, Thank you!
     
  13. Scrambler82

    Scrambler82 Old Guy User

    Found a couple more.

    Here is the full view and the lower mount.

    Hope these help some.

    [​IMG]


    [​IMG]
     
    Last edited: May 14, 2013
  14. OP
    Hooligan

    Hooligan Rangerholic!!

    Rock on brother! Thanks a lot!
     
  15. joshyddog

    joshyddog New Member

    Man, I all ways miss out on the deals...

    Would love to have that set up soon!

    good luck on the install hooligan!
     
  16. OP
    Hooligan

    Hooligan Rangerholic!!

    Thanks man. Get the parts little by little. I'm sure Mikerider can help you out too
     
  17. Scrambler82

    Scrambler82 Old Guy User

    It is nice without the t-bars on the underside.
    Most people have to double take on the truck when they first look her over.

    First side look says something is missing.
     
  18. doyouquaxu

    doyouquaxu FUUUUUUUUUUUUU

    I'm gonna be doing my own conversion soon too :)
    [​IMG]
     
  19. Fx4wannabe01

    Fx4wannabe01 New Member

    Mine are pretty much just like Scrambler's. Except my support gusseting is more angled out instead of being almost parallel. As well as more angled at the top....this allows for easy installation of the upper coil-over bolt. My experience with the couple RCD kits I used to personally work on, many bolt the kit together THEN weld the gussets. If the gussets are too high up, you CANNOT remove the upper coil-over bolt unless you grind. And you've gotta get that out first if you need to remove the upper brackets for any reason.

    I made my kit with about 3 test fittings and test parts and cardboard plus the experience of working on a couple RCD kits. In fact my lower mounts are near exact copies of RCD 'cause I used a RCD lower mount as reference to build mine. 1/4" material for gussets and upper mounts, I believe 3/16" for lower mount.

    Get yourself a set of Jeep TJ front brake lines. They're longer, have the same exact thread sizes/banjo sizes as the stock Ranger lines. Many use them when they're double lifted regardless of coil-over or not. Grind away the locating tabs, and you can bolt the bracket on the line to the frame using the stock bolts.

    Get the coil-over wrenches!!!! Makes it way easier. When I was putting mine in, I had way too much preload....the whole truck kept raising up when I tried to get the knuckle bolted back up. Loosened 'em up some and it was money. Ride height perfect on both sides.

    Pay attention to where the bump stop used to be in the pics below. It needs to be clearanced for coil clearance. I WAY over cut mine thanks to an out-of-control saw-zall operator (me). lol.


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    TJ brake line installed and bolted up. And my scruffy mug.
    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: May 26, 2013

Share This Page