Skid Plates 1998-present

J

Joshp767

New Member
Hi everyone I'm new to this forum but I wanted to make my skidplates available here. I sell front and transfer case skidplates that are fully Cnc cut from 3/16" steel and brake bent to create the toughest skid available for these trucks. Will fit all torsion bar suspension trucks (and I believe all similar explorers) as well as body lifted vehicles. Pm me for more info or to purchase or visit my website @ www.rcimetalworks.com

$135 Front Plate Bare Metal
$160 Front Plate Black Powder Coat + Shipping
$85 Transfer Case Bare
$110 Transfer Case Powder Coat

bd59ce5f2b237b479f4930b8040e5940.jpg

0ee8e76f9b5d319c801c9cedc9617c56.jpg

e282035a3a3ba239d03f387181d3ab01.jpg

33201610_lzwd.png

33201608.png
 
Last edited:
Working with Hooligan right now to hopefully develop a design to work with superlifted trucks based on the existing foundation so Ill keep you posted on that... but probably won't make one for lifts larger than that.
 
Well I should be 5.5in soon and would love to have a skid plate in the near future
 
Yessss!! About time you came hear man!!
FYI .. I am running Josh's front skid, transfer skid, rear bumper, and rock sliders. All of which are amazing and can certainly withstand a beating !!! I get " high centered " and run over trees all the time and the only thing that happens is I chip off the paint lol!!!
 
with all the rocks out here I may have to get one
thanks Clinton for fixin it!
 
http://rcimetalworks.com/

here is a good link

Also is there a forum member discount , as I see it is 135.00 for the front skid plate to anyone
 
Last edited by a moderator:
Not really worried about the tcase. I haven't hit it off anything, and I don't do that hardcore of wheeling.


Would you be able to post some pics of how the front skid would be mounted? My front crossmember has a few dents and dings in it from off roading...
 
Redneck_ranger said:
Not really worried about the tcase. I haven't hit it off anything, and I don't do that hardcore of wheeling.


Would you be able to post some pics of how the front skid would be mounted? My front crossmember has a few dents and dings in it from off roading...
Click to expand...

The skid mounts to the 4 holes where the stock plastic one goes , does not attach to the k member at all
 
You must log in or register to reply here.
Back
Top