Steppie Rear Bumper Project - Custom 4x4 Fab

No photos but working on it !

Bumpers and Back Rack are back from the sandblasters.
They did a great job, ABS SandBlasting of Salem, MA.

Primed with DuPOnt Metal Etching Primer, ran out, looking for more.
Letting them set and once I get more primer I will touch them up then on to a DuPOnt Rattle Can Hot Rod Black, sort of a semi-gloss, should look good, on the Bumpers, front and rear, Back Rack and thinking on painting the hood the same Hot Rod Black but have a pro do it.
 
OK so the bumper is mounted, still needs a little tweak in these pictures.

IMG_0004_zps993e5716.jpg


IMG_0003_zps9442ab7c.jpg


IMG_0002_zpsc37df8b8.jpg


The weight is approximately 95 lbs, and it is enough to smooth out the ride of the truck some.

Still needs wiring, Plate, Backup and running lights.

Remember this is the first Ford Ranger Steppie Bumper ever… and it is availble through Custom 4x4 Fabrication of OK.

Call Mike at C4x4 and talk about what you want.

With a slight modification is can fit a standard Styleside Bed too.
 
You must log in or register to reply here.
Back
Top