In need of help...! Recently my 2003 Ford Ranger (3.0 V6, XLT, 2wd) started leaking power steering fluid onto my engine block. I replaced the pump and the rubber low pressure line that comes from the reservoir to the steering rack. I cleaned the engine and drove for about 2 days before it started again. The only part I haven't replaced is the metal high pressure line. My truck also has a faulty AC compressor, and the wet spot begins on the top of this and seems to work its way down to the power steering pump housing. With these two problems combined, I'm not sure what exactly is leaking. I have no loss of ANY fluid in the engine, or any check engine light. The power steering system whines but as said before, I haven't lost any fluid from the reservoir. Please help!