Open chat thread

Welp... didnt have high hopes to start with and really dont now. Hooked all 3 wires up, turned the key and... you guessed it, nothin
 
if i'm not mistaken after 03 ford did away with the gem clinton.... i'm doing some more research so far everythign i have found says the grey/black wire needs to hook into the violet/orange coming from the pcm under the hood...
 
I found a grey/yellow wire wayyy under my dash. Is that right?

Tap it and try it

if i'm not mistaken after 03 ford did away with the gem clinton.... i'm doing some more research so far everythign i have found says the grey/black wire needs to hook into the violet/orange coming from the pcm under the hood...

I thought they still had them in newer models, just higher up in the dash
 
the pink/orange wont work.... the black/grey is for the VSS(vehicle speed sensor)

everythign i have found online says they did away with it.... for 03-06 they did the smart junction if i'm reading it right and then moved it again in 07+....
 
ok hook the wires up in this order and it should start working....

  • Console Power: Grey/Yellow hooks to White/Blue (white wire with blue stripe - truck radio harness)
  • Console Night Dim: Light Blue/Red or Red/Black hooks to Blue/White (blue wire with white stripe - truck radio harness)
  • Console Maps: Green/Orange hooks to Violet/Red (truck radio harness)
  • Console Dome: Black/Blue hooks to Green/Blue (above truck's factory dome)
  • Console VSS: Grey/Black hooks to Violet/Orange (pin #1 of the truck's center PCM connector)
  • Console Ground: Black hooks to truck chassis ground or you could use the OHC mounting bracket as in previous write ups...
 
Last edited:
No one has a good answer? I unwired EVERYTHING. Im startin from scratch. Im gonna look for wires that rae the exact same color and tap them. If they dont work, im sellin the OHC and leaving the gaping hole in my headliner
 
Back
Top