I bought a 92 Ford Ranger with a 3.0 and an m5od really cheap and it needed a transmission. So I went out and purchased an m5od from a 95 ranger I believe it bolted up nicely but in the tailshaft of the transmission there is no hole for the VSS sensor(so obviously my speedometer/odometer doesnt work). So what I did was took the tailshaft off the busted transmission that came with the truck and stuck it on the new transmission. Now there is no gear inside the trans to spin this sensor for the speedo. Is there anyway I can use this trans and the gear from the old trans to get my speedo to work? I dont have much experience inside of transmissions. (ohh and I have already checked the speedo cable/vss sensor/and instrument cluster broke none of them are broke). Thanks
