Brinker88
Black sheep o' the family
Now, if any of you are like me that have the TTB, they've torn into it a couple of times and Im sure you know what a pain in the a$$ it is to drop that front pumpkin :furious: just to remove that center axle shaft to change the u-joint.
This is the easiest mod I've ever done in my life (after the pumpkin's removed of course).
TOOLS NEEDED:
1.) See:
2.) Welder (for some people)
____________________________________________________________
PARTS NEEDED:
1.) New u-joint ( you're in there already, so why not? )
2.) Echo chain saw part # 69621655730
- readily available at most lawn and garden shops for around $5.00
3.) #20 Hose clamp (1 3/4" to 3/4") or a welder
_____________________________________________________________
Installation of the spring is a little tricky (tight fit) After it's on there, use the c-clamp to bolt it up or tack weld the ends onto the shaft. Either way works.
This is the easiest mod I've ever done in my life (after the pumpkin's removed of course).
TOOLS NEEDED:
1.) See:
2.) Welder (for some people)
____________________________________________________________
PARTS NEEDED:
1.) New u-joint ( you're in there already, so why not? )
2.) Echo chain saw part # 69621655730
- readily available at most lawn and garden shops for around $5.00
3.) #20 Hose clamp (1 3/4" to 3/4") or a welder
_____________________________________________________________
Installation of the spring is a little tricky (tight fit) After it's on there, use the c-clamp to bolt it up or tack weld the ends onto the shaft. Either way works.
Last edited by a moderator:
