Help please. With a 93 lock cylinder.

R

Rod

New Member
Help please I've have a 93 ford ranger with a lock cylinder problem. I start it if I release the key to run position it dies if I hold on to key an slowly ease it back between run an start it stays running. Don't know what to do from here. Help please thanks Rod
 
Sounds like the "real" ignition switch down below the steering column. Ive replaced ignition locks, and havent heard of this with just the cylinder there in the column. Then again Im not a master mechanic either.
 
cacher said:
Sounds like the "real" ignition switch down below the steering column. Ive replaced ignition locks, and havent heard of this with just the cylinder there in the column. Then again Im not a master mechanic either.
Click to expand...
I do believe with my 93 I had there is still a rod and separate switch further down the column. I'll be able to confirm that when I pick up a '94 ranger later today. Like I had put in other replies recently, where's Mhoward? He knows pretty much everything when it comes to 2nd gen rangers.
 
You must log in or register to reply here.
Back
Top