expo OHC, what to grab?

RoadRanger

RoadRanger

-Skylark65-
found a nice expo OHC and a pair of double visors at the JY on friday, i'm planning on heading back to get 'em this week.

i wanted to ask anyone who's removed one at the JY, where does the wireing harness run, how the console itself is removed, and where do the temp sensor and any other sensors i need live?

i just want to double check before i head out there.
 
the ohc is mounted by a few screws to a plate, you need the plate too, that is mounted by more screws you need about 4 inches of the harness so cut it after the pig tail connector, and the temp sensor is on the drive side of hidden behind the bumper
 
Take the OHC, mount plate, ALL the screws, as much wire as you can (Runs down the A pillar and cut it off at the dash) and the sensor located under the drivers side headlight, cut the wire as far back as possible. When you go, shoot me a phone call, I may be able to get out and go with you
 
hazard-maine said:
the ohc is mounted by a few screws to a plate, you need the plate too, that is mounted by more screws you need about 4 inches of the harness so cut it after the pig tail connector, and the temp sensor is on the drive side of hidden behind the bumper
Click to expand...

Hooligan said:
Take the OHC, mount plate, ALL the screws, as much wire as you can (Runs down the A pillar and cut it off at the dash) and the sensor located under the drivers side headlight, cut the wire as far back as possible. When you go, shoot me a phone call, I may be able to get out and go with you
Click to expand...

cool, thanks for the info guys. any chance i could get a pic of the temp sensor so i know what i'm looking for? i forget what it looks like.

Clinton, i'm planning on heading out thursday, lemme know if you can make it. i'm going to that yard i told you about over near hacketstown, while they've still got some neat stuff left!


djfllmn said:
i wanna go!!!!!!!!!! lol
Click to expand...

DJ, if you scroll down a bit on my photobucket i've got mabe a dozen pics i took at this yard a couple years back. of course it's nowhere as cool as seeing it in person :D

http://s116.beta.photobucket.com/us...ibrary/?&_suid=135402758320306989875253177475
 
these pictures should help you out
DSCN8192.jpg

DSCN8191.jpg

DSCN8190.jpg

DSCN8189.jpg
 
thanks again guys, i finally got out to the JY yesterday and got everything pulled. console & visors came right out, the door piller trim was already off so i grabbed the wireing harness all the way down to the dash. thankfully my buddie came with and helped pull the front end apart to find the temp sensor, they moved the expo around with a dozer and the drivers side of the front end was smashed in, had to pull the whole front clip off to get the sensor! lucky my buddie has experence pulling the front clip off RBV's, lol.
 
You must log in or register to reply here.
Back
Top