Change to Power locks and windows

uh... everything. Window tracks, lock actuators, wires, switches, alot. Best thing to find would most likely be to find your exact year truck with power everything
 
I just tore a door apart for my half door project....There's so many levers and electronics and motors etc. It took me over 2 hours just to tear the door down.
 
I got two doors from a local JY, 02 Ranger I think, that are fully powered.
I hope to swap over all of the OEM stuff to my manual doors.
There is a thread on another site that wires up the OEM power windows without using the factory dash harness, just the door harness and a little more, it looks a lot easier than trying to put in a Dash Harness. (I am new on this site so I am not familiar with mentioning or linking another site) but if it is OK I will hook it up.

I WILL be doing this mod to my truck this spring/summer after the audio upgrade; a lot easier than trying to lean over to the passenger side to wind down a window.
 
Scrambler82 said:
I got two doors from a local JY, 02 Ranger I think, that are fully powered.
I hope to swap over all of the OEM stuff to my manual doors.
There is a thread on another site that wires up the OEM power windows without using the factory dash harness, just the door harness and a little more, it looks a lot easier than trying to put in a Dash Harness. (I am new on this site so I am not familiar with mentioning or linking another site) but if it is OK I will hook it up.

I WILL be doing this mod to my truck this spring/summer after the audio upgrade; a lot easier than trying to lean over to the passenger side to wind down a window.
Click to expand...

Thanks for the info, take pics of the process and make a how-to if you would please. I know many people want to do this but there aren't many write ups for this type of thing. I know there is one but it went through the factory dash harness.
 
You must log in or register to reply here.
Back
Top