Chamber problem

[dsupan]

I put on a 2" leveling kit on my 94 ranger and its about 10+ on the chamber now doing some reading i find that with that much out of wack an alignment wont give me 100% chamber. Any ideas of what ill have to do if the alignment dont work? or anyone ran into this problem?

 

[Hooligan]

Hopefully Brinker88 can Chime in here, he may have the answer for you

 

[ryanzander]

which way is your camber adjustment cam facing?

 

[Brinker88]

NO Fing WAY is it 10 degrees off. If it is, you my freind have F-ed something up. MOST it should be off is 4 degrees. Post pics so I can see it...look at my finished product on here.

 

[Brinker88]

http://www.fordrangerforum.com/vehicle-snapshots/31474-leveling-kit-now-horrible-camber-caster.html

That's 4 degrees passenger side and 3 degrees driver

 

[dsupan]

those pictures arent as far out as mine was lol i took it back off because its my daily driver and i didnt want to drive it like that so i have no pics, but if it help about 1-2 inchs of the outside of my tires were on the ground the rest were off

 

[Brinker88]

You must have done something wrong dude. That, or they sent you 4" lift springs...Post some pictures up.

Are the coils 2 inches longer than your stock ones?

 

[dsupan]

i didnt get coils i got 2 inch spring blocks for the front

 

[Brinker88]

Somethings wrong definitely if you've truely got 10 degrees camber on that bitch...Post some pics so I can look at it..

 

[dsupan]

like i said i took the kit back off because its my daily driver and i didnt want to by new rubber in a week

 

[Brinker88]

You do realize the spacers go on the bottom of the coil, right?