Bull Bars & Tow Hooks

Discussion in '1998 - Present Ford Ranger' started by SilverRanger, Mar 19, 2009.

  1. SilverRanger

    SilverRanger New Member

  2. 99Ranger4x4

    99Ranger4x4 Truck Accessory Retailer

    I haven't put one on a Ranger yet but on some trucks you can keep the tow hooks and on some you can't. The brackets usually use the same mounting holes as the tow hooks. Sometimes you can put the bracket on and the tow hook on top of it. If you don't mind taking you tow hooks off then you should have no problem. I will be putting a brush gaurd on a Ranger that has tow hooks friday. Although it isn't the same as a bullbar the mounting brackets should be close to the same. I will let you know then, if you can wait.
    Last edited: Mar 25, 2009
  3. SilverRanger

    SilverRanger New Member

    yeah...sure

    I wont be doing it for a few weeks...

    Post some pics too

    Thanks
  4. 99Ranger4x4

    99Ranger4x4 Truck Accessory Retailer

    Ok, Will do.
  5. 99Ranger4x4

    99Ranger4x4 Truck Accessory Retailer

    If the bull bar uses the same mounting brackets as the brush gaurd it bolts to the out side of the frame rails and uses one of the bumper mounting bolts.
  6. Tonya Gilmore

    Tonya Gilmore New Member

    There was one on the F-150 I used to have & it used the tow hooks. I wanted to take it off but there was some paint chipped behind it so I just left it. As far as Rangers I can check around for you

Share This Page