98 sas v8 build

[xjgiles]

Figured I would start a build thread I don't take a bunch of pictures but will do my best.

My plans are 302 swap full width axles 3 link front with coils and eventually coil overs when budget allows. Keeping the rear simple with re arched 63" Chevrolet springs 38's and bead locks when budget allows and a cage

As the Project currently sits I have a 302 sitting in the frame the rear suspension is done minus shocks. The front I have almost everything to do it and its current waiting for me to get time to work on it. On to the pictures

Sent from my iPhone using Tapatalk

 

[xjgiles]

Well I got a chance to flex it out a little today (just for reference I'm 5'8'' tall) my cherry picker wouldn't go any higher so that's as high as I could go still had 3 " of shaft showing on the shocks also got my fuel cell frame welded up and in the frame and also started on my custom headers.

Sent from my iPhone using Tapatalk

 

[xjgiles]

Got the drivers side header welded up and started on the passengers side also got my steering box mounted

Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[xjgiles]

It's been a little while since I updated this haven't done much mounted the radiator threw a extra stepside box on it I had laying around. Currently it is sitting outside of my barn while I work on my jeep. It needs to get a wash down clean some of the dust off things. I'm currently working on wiring it.

Sent from my iPhone using Tapatalk

 

[Nathan]

That's looking amazing!