4x4 problem

D

dsupan

New Member
my 94 is having a 4x4 problem. it didnt work when i got it they said it was a bad module, i got a new one and its still didnt work so i got a new push button in the dash still no fix just replaced the transfer case motor and still not working, fuses are all good and i can only put it in 4x4 when the trans case is off and i turn it manually any ideas?????
 
Does it click when you push the button? There are TWO fuses under the hood for the t-case. Make sure ALL your wires are connected properly
 
the module will click but the case wont engage but its in 4x4 if i turn it with a wrench lol took it through a field just to make sure it wasnt the hub and all my fuses are good and connection is good so i have no idea what the f*ck it is
 
Sounds like the motor to me. If you got a remanned one, it might be defected...I never trust remanned stuff like that...when I got mine, I made sure it was new...set me back a pretty penny but well worth it. Take your hubs apart, clean and regrease them too.
 
Brinker88 said:
^Not true...one will still spin if it engages (or has limited slip)
Click to expand...
I had a bad 4x4 hub on the driver side and my 4wd light would come on but my front wheels were not engaged (either of them). I changed the driver side hub and it worked flawlessly.
 
its elec, shift with manual hubs, and the truck the motor came out it work when it was in it i know this because i got it from a friends truck who was selling it and we just switched out the motor and he sold his with a bad motor in it but my light does not come on when i hit the 4x4 button and i have 3 different buttons i got from junk yards but they all work because i can here the module click when i hit the button
 
You must log in or register to reply here.
Back
Top