2003 ranger edge 3.0 won’t start

[Jerecl2]

i have a 2003 ranger edge 3.0 that ran ok then one of the plug wires some how got rapped around the steering colum and pulled it out of the plugs. Luckily still under warranty so I replaced the wires and made sure they were in the correct order 3 times now will crank but will not start. It’s acting like it’s something electrical but I checked the plugs and there all good replaced less then 6 months ago. Not sure what’s going on any suggestions?

 

[metrapper]

I would start with the fuel pump is it working? Should hear it pump up, check to see if it has a crank sensor if so check wires and is tight,Check to see if it has a cam sensor,is the cap in good condition? wires to it? just saying thats what I would start with