escort_gts
Member
1993 Ford Ranger (2012-01-17 20:15:24)
1993 Ford Ranger
- Thread starter escort_gts
- Start date
Redneck_ranger
Banned
I'm diggin them tires man. I was looking for them online, but can't find em. Where'd you get them at?
escort_gts
Member
which ones? the mud kings or the km2?
escort_gts
Member
Yeah, I have one over on TRS. I just need the time to get one on here....give me a few days, it's in the works.
Redneck_ranger
Banned
Kings of mud lol
escort_gts
Member
Ok, for now I have a link to the thread on TRS in my signature. That way at least you have something to look at for now...
escort_gts
Member
I work at BFGoodrich. They were a private label tire we used to make. They were discontinued and were selling them to us employees cheap...Got them for $58 each shipped to my door....they stopped making them 2 or 3 years ago. IMO, they sucked. I didn't keep them long.
Redneck_ranger
Banned
Ah damn lol Any chance of a random set sitting around? Haha. My one co-worker's husband has the all terrains on his Sierra and loves em.
nicksranger01
New Member
AC compressor converted to on-board-air, what the hell does that mean sounds interesting
escort_gts
Member
nicksranger01 said:
I turned the ac compressor into an air compressor. It has a 5gal tank under the bed. I have air fitting front and rear to run air impact, air the tires, etc...
Sent from my PC36100 using Forum Runner
nicksranger01
New Member
hmm sounds like something I'm gonna have to try
SalRanger2
Ranger Lover
your truck is a beast man, that on board air sounds sweet ive never heard of that
Redneck_ranger
Banned
I would love to set something up like that. You should definitely do a how-to on it
SalRanger2
Ranger Lover
yea a how to would be perfect
escort_gts
Member
Redneck_ranger said:
Sure thing. Give me a couple days.
Sent from my PC36100 using Forum Runner
Redneck_ranger
Banned
Sweet. My A/C doesn't work, and that would be useful haha
escort_gts
Member
Where do I post a build thread? In what category?
Sent from my PC36100 using Forum Runner
Sent from my PC36100 using Forum Runner
escort_gts
Member
Here is the build for the on-board-air.
The 5 gallon air tank
Brackets welded to the frame and the tank bolted to that.
I put in an oiler I got on eBay for $4 and have the inlet to the compressor ran into the air filter box
Here is the outlet that goes to a check valve then to a manifold block that has a gauge, front air line, safty valve, pressure switch 90psi on 120psi off, and then a 3/8 hose that runs to the tank in the back
The pressure switch wires go to the a/c pressure switch wires that I cut off.
So this way I can turn on the compressor with the a/c switch on the dash and also this way I can utilize the factory relay for the a/c compressor clutch
Here is a finished pic of the tank
I have a fitting here...
...and here
It will fill the tank at idle from 0-120psi in about 40-50 seconds. Not to bad and all I invested was about $50 or so :headbang:
Sent from my PC36100 using Forum Runner
The 5 gallon air tank
Brackets welded to the frame and the tank bolted to that.
I put in an oiler I got on eBay for $4 and have the inlet to the compressor ran into the air filter box
Here is the outlet that goes to a check valve then to a manifold block that has a gauge, front air line, safty valve, pressure switch 90psi on 120psi off, and then a 3/8 hose that runs to the tank in the back
The pressure switch wires go to the a/c pressure switch wires that I cut off.
So this way I can turn on the compressor with the a/c switch on the dash and also this way I can utilize the factory relay for the a/c compressor clutch
Here is a finished pic of the tank
I have a fitting here...
...and here
It will fill the tank at idle from 0-120psi in about 40-50 seconds. Not to bad and all I invested was about $50 or so :headbang:
Sent from my PC36100 using Forum Runner