I have a 97 ranger and am having problems with the turn signals.
It keeps blowing the fuse when i turn on my right hand turn signal, but
When i use the left it works without blowing. First thing comes to mind
Is wiring which i know nothing about where do i start to look any help
Is appriciated.
I would start with pulling the lamp, check to see how the socket looks, pull the Light Assembly and check the wiring, making sure the connection are good and there is a ground wire connection.
If all looks good, using a Multimeter, check for 12 volts first using the socket connections and then in the wiring.
If still no voltage reading start tracing the wiring backward from the socket.
If all looks good and all connections are good, no broken or bare wiring, you may want to check the Muti-function Switch (MFS), inside of the steering column. It will come apart easily, just time and a few tools is all that is needed and some patience.
Check the connection on the MFS for fully seated pins and no broken parts.
If all is well then you may need to get another MFS and replace the one you have, just to see if the one you have is good or not.
Sorry I can't help you more that that, I can tell you what I might do other than taking it to the N-th degree.
Ltr
