Recent content by wilfvoakes

The throat is conncted to the tranbsmision . If this gets out of alinement it will not shift . As the transmisson does not know the rpm of the moter . Do some reseach and find out how to reagyst the linkage between the throtte and the transmition . And you will be good to go . Is not a...

First thing is to clean what ever it is you are painting .Then you have to remove the serface of any old paint .If paint has peeled then you have to create a surface that the paint will stick to .as etching with sandpaper or solvents . Then appy an under coating . Paint color coat , and top or...

Oh yes we can

There is a black plastic thing by the rad that when gets to certain temperature may cut out when it cools it will work again it about 2inches by 4 inches by 1/2 inch thick .

There is a black plastic thing by the radiator that may be bad

The wheel beaing is made so that the bevail in the track makes a slightly loose beaing tight when the weight of the truck is on the wheels .to tight will make the bearing heat up and melt the geese. No grease no good .

Have you clerked the ground wire from the moter to the frame . On the wiper mothr and on the truck moter . Ground wires do weird things when not making good contact .

Have you checed the catholetic converter may be plugged . If pluggd will give you the same reactions

First you should never jump start anything with the Motor running ,can burn out altimeter if hiked up backwards ,sounds like a fuel problem .there is a nut looking item that can be taken off and a pressure gage put on the fuel linen. If pressure is not constant you have a fuel problem . Other...