Recent content by Mattio

  1. M

    Driving in 4WD with front hubs unlocked bad?

    Actually, was able to find some info online. It looks like the consensus is that it's OK to do this in 4 hi but not in 4 lo...
  2. M

    Driving in 4WD with front hubs unlocked bad?

    Is it bad for the truck (with manual hubs) to be driving in 4WD with the front hubs unlocked?
  3. M

    CV axle not turning on one side, normal?

    Thank you. I had to look up some more stuff to see what you're talking about but you pointed me in the right direction. Thanks
  4. M

    CV axle not turning on one side, normal?

    So I put the 1998 Ford Ranger 4.0 4x4 up on jacks yesterday so I could put it in 4x4 and see if all 4 wheels turned. What I saw was pretty interesting. The front cv axle on the driver's side turned but the wheel did not (vacuum locking bearing problem I'm guessing and I'm going to install...
  5. M

    Strange brake coupling pinhole leak (picture)

    By seal, do you mean the little rubber dealio that goes around? What's the purpose of this pinhole that they put in the coupling?
  6. M

    Strange brake coupling pinhole leak (picture)

    1998 Ford Ranger 4x4 4.0L Extended Cab The coupling that attaches the metal brake line to the master brake cylinder has a pinhole (by design) under a rubber band and I believe this pinhole is leaking while pressure is applied to the brake pedal. Can anybody help me out with this one? In the...
  7. M

    How to check if vacuum hub is engaging?

    Cool, thanks guys!
  8. M

    Brake hose fittings metric or standard?

    I'm going to be changing out the front brake hoses on my 98 ranger next weekend and I have to get it done in one shot because I spend most of my time on the road for work. I know I have metric line wrenches at home but don't think I have standard ones. Does anyone know if they're metric or...
  9. M

    How to check if vacuum hub is engaging?

    So, the 01 Rangers are always in 4x4, you can't drive them in 2WD?
  10. M

    How to check if vacuum hub is engaging?

    Thanks, guys. Freemans, what exactly do you mean by this?:
  11. M

    How to check if vacuum hub is engaging?

    I have a 1998 4x4 4.0L extended cab. I was told by a mechanic that the left front vacuum hub was not engaging. However, he was not a very trustworthy mechanic as I came to find (and I didn't give him any of my business) and I'm wondering how I can check this myself. Do I need to get all 4...
  12. M

    Grinding noise/severe power loss. Bearing or Transfer Case??

    Update. Turns out it's the transfer case
  13. M

    Grinding noise/severe power loss. Bearing or Transfer Case??

    Also, is there no chance that the issue is with the automatic transmission?
  14. M

    Grinding noise/severe power loss. Bearing or Transfer Case??

    That's not a bad deal!!! Thanks for pointing that out! I don't think the truck was lifted at any point. It sat about 6 inches higher than another Ranger 4x4 I was parked next to.. I don't know if it's because of the trim level. Forgive my ignorance, I've only been a Ranger owner for a...
Back
Top