Hooligan
Rangerholic!!
In this How to, You will learn how to replace an EGR Vacuum Regulator Solenoid on a 4.0 SOHC.
Tools required:
Small ratchet & 9/32 socket
Step 1.
Disconnect your negative battery terminal.
Step 2.
Using your ratchet and 9/32 socket, Remove your throttle cover.
Step 3.
Locate the EGR Vacuum Regulator Solenoid. The solenoid is directly behind your EGR valve. Disconnect the electrical connector, then disconnect the 2 vacuum hoses on the bottom.
Step 4.
Once you have disconnected all vacuum hoses and the electrical connector, using your ratchet and 9/32 socket, remove the 2 bolts holding the solenoid to the side of the intake manifold. Remove the solenoid.
Step 5.
Mount the new Solenoid in reverse order of instructions, and re-attach your battery negative terminal.
Congratulations! You have successfully changed out your EGR Vacuum Regulator Solenoid!
Tools required:
Small ratchet & 9/32 socket
Step 1.
Disconnect your negative battery terminal.
Step 2.
Using your ratchet and 9/32 socket, Remove your throttle cover.
Step 3.
Locate the EGR Vacuum Regulator Solenoid. The solenoid is directly behind your EGR valve. Disconnect the electrical connector, then disconnect the 2 vacuum hoses on the bottom.
Step 4.
Once you have disconnected all vacuum hoses and the electrical connector, using your ratchet and 9/32 socket, remove the 2 bolts holding the solenoid to the side of the intake manifold. Remove the solenoid.
Step 5.
Mount the new Solenoid in reverse order of instructions, and re-attach your battery negative terminal.
Congratulations! You have successfully changed out your EGR Vacuum Regulator Solenoid!