i've got a 99 ranger 4x4 extended cab and i'm looking at putting a 3in body lift on it. to anyone who has done this before, how easy was it? where did you get hung up? and how long did it take? I just recently took the box off to remove rust and it was almost imposible to bolt the box back down because the gas tank was in the way of one of the bolts. Did anyone else have a problem with that?
body lift
- Thread starter Tigers99
- Start date
Jelly's Ford
Riding High in the Saddle
I myself have had no experience in the body lift sector. I have heard from others that put them are greatly pleased when it is installed but the installation of the lift is quite a booger. However here is a great site that goes over all of the bugs that you may encounter while putting the body lift on. Check it out...http://therangerstation.com/tech_library/1998_BodyLift.html
Hope this helps ya man. That site is full of Ranger tech dating back to the 80's, good stuff!
Hope this helps ya man. That site is full of Ranger tech dating back to the 80's, good stuff!
Last edited:
1997ranger
New Member
i did my body lift in my garage with a floor jack and a block of wood. it took me by myself about 10 hrs but that was me stoppin and readin directions and eatin and all so im sure you could do it faster. on a scale of 1 to 10 its a 6 or 7 the front two are a pita though
