Search results

no cam installed. Took apart the throttle body and cleaned it real well today but still didn't help either! I just thought about this, I had the tank dropped to check the Fuel Pump in Feb because I was on my way to Mississippi for training and when I arrived in Hamilton, Al the truck quit on me...

No cam installed and I changed out the EGR solenoid today, still missing and loping!

Yes when I mentioned hot wires that meant the 2 small probes that make up the sensor!

Took the MAF sensor off of vehicle and thoroughly cleaned the hot wires and electrical connectors. It did seem to have more HP when I revved it up but it still has a real rough idle and missing. Fuel pressure is fine, no vacuum leaks and EGR valve is ok.

Thank you both, there is definitely no vacuum leaks but I will clean the MAF, check fuel pressure and check the EGR valve and get back with ya'll!!!

Thanks for your response! I haven't checked pressure but I unplugged the MAF and it made no change whatsoever, will that work with checking the MAF or would it actually just have to be cleaned to tell?

5 speed 2.3 missing in idle and in all gears, will only run in idle for about 2-4 minutes before shutting off due to rough idle. Changed both coil packs, spark plugs, wires and installed new fuel filter but it didn't fix the problem so I can use any advise anyone has please!!!

1994 Ford Ranger XLT 2.3, misses in idle and throughout all gears, will only idle for about 2-4 min before it quits and has to be restarted. Changed both coil packs, spark plugs and wires are new and installed new fuel filter, nothing helped. Can you give me some insight to my problem? Thanks...