Search results

It worked. Thanks again.

Just got done installing a 4" lift with extended radius arms and 33x12.5 tires on my 94 STX extended cab. Here's pic of how it turned out.

Thanks. I'll give it a try. Pete

I've tried a couple of times to post a pic of my truck in the suspension section. I just put a lift kit and 33's on it. Every time I try I get an error that the pic is too large. I've tried cropping it down a couple of times with no luck. Does anyone know the size limit? Thanks. Pete

Not sure what manual hub you are going to be using but, my 94 has a set of Warn manual hubs on it and there is no difference for the wheels. Pete

Not sure about the 5r55e not bolting up to the sohc. I do know that the 4r70w will for sure not fit.

I replaced the power mirrors on my 94 with the square mirrors. it required some detective work to figure out what wire did what and I had to swap the mirrors to the old harness of my 94. Don't regret it. I think they look better. I got brand new ones from Rockauto for about $25.00 apiece two...

My guess is that either your trans cooler in the radiator tank has sprung a leak allowing the trans fluid to contaminate the coolant or, if it's a 4x4, the front seal on the transfer case could've gone bad allowing trans fluid to leak into the t-case. Was a Ford trans mechanic for 20 years and...

They switched to a "returnless" system, I think in 96. You can tell if the engine in the 95 has an aluminum upper intake it will probably have a return line. If the 99 has a plastic upper intake it would not. I'm not sure but, you might be able to swap upper intakes and fuel rails from the...

I got one for my 94 STX from Rock Auto. I haven't looked up your year but, you might have luck there. Pete

Also, there is a place in Billings, Montana called "Torque King 4X4". They sell good, used parts at a pretty reasonable price. I got an I-beam and a radius arm, shipped to Michigan, for about $125.00. Just an option to consider as well. Pete

Try looking at "Jeff's Bronco Graveyard". I have a Dana 35 in my 94 and they had everything for the front axle. If they're the same, I think the kit you need for the seals is around $28.00. Good luck. Pete

No. I can't find one anywhere! I've found the previous generation, and the following generation. Nothing 93-96. It has been suggested to me to drill holes, epoxy some bolts sticking up and use nuts and large washers in a ring around the sending unit to fasten it down. I haven't had the guts to...

Not sure where you would get new trans lines from. You might try to make a replacement yourself. If you can save the factory ends, get some (3/8" I think) steel lne and some compression fittings you should be able to come up with something that works. I don't think there are many crazy bends in...

That certainly is promising! Also, I thought i'd pass along some info. I don't know your "ultimate plan" with your Ranger but, if you're interested, Look up a place called "NPD". They are usually known for classic muscle car parts but, they have a fairly new Ranger and S-10 section full of body...

No problem. Good luck. If it is the electric shift transfer case, and its stuck. The 4x4 lights should be blinking. If I remember correctly. Pete

I had to rebuild the auto trans in my 94 STX 4x4. it wouldn't move forward but, had reverse. If yours doesn't move at all, it's probably the one-way clutch at the front of the trans. Try putting it in "D" instead of "OD" and see if anything happens. Putting it on "D" will apply a friction clutch...

Hi. Don't know if I'm too late or not. Just saw this post. There is a place called NPD, National Parts Depot. They usually only have classic or, muscle car parts. However, I found that they have a new Ranger section. I just bought both front fenders and a tailgate, new (Chinese) for my 94...

Hello all, I have a 1994 4.0 auto trans ext cab stx. It has a plastic fuel tank in it and the fuel pump/sending unit ring on the tank has rusted out. Not the lock ring itself but, the ring bonded to the plastic tank. I cant for the life of me find a replacement tank for this truck. Any...