Trouble with Cylinder Head

Discussion in '3.0 Engine' started by peteryoungblood86, Jul 9, 2012.

  1. peteryoungblood86

    peteryoungblood86 New Member

    Hello,

    I'm attempting to remove the right cylinder head form my 2001 Ranger in order to repair a valve, but I am having a hell of a time getting the head free from the engine. I have removed the exhaust manifold and all the head bolts, but the head just won't budge. Any ideas or tips would be extremely appreciated.

    Thanks,
    Peter
     
    Last edited: Jul 9, 2012
  2. Ranger Forum Sign Up!

    Join RangerForum.com Today - It's Totally Free!

    Are you a Ford Ranger fan? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your Ford, and have a great time with other Ranger fans. Whether your an old timer or just bought your Ford you'll find that Ranger Forum is a great community to join. Best of all it's totally free!

    Join RnagerForum.com Today! JOIN FOR FREE

  3. Brinker88

    Brinker88 Black sheep o' the family

    Double and TRIPLE check you did not miss a bolt (I've done that) and the use a long heavy duty screw driver or pry bar to pry up on the exhaust manifold ports or use a brass hammer to knock it loose.
     
  4. OlYeller

    OlYeller love my truck

    do you have the factory shop manuals?

    I have them, and if you need, I can look over/take pics of that section for you. But it will be tomorrow before I can get to it..... what size engine do you have?
     
    Last edited: Jul 10, 2012
  5. OP
    peteryoungblood86

    peteryoungblood86 New Member

    I have looked and can find no more bolts. As far as I know, there are only eight bolts holding the cylinder head onto the block (besides the exhause manifold). Is this correct?

    I do not have the factory shop manuals, but I would greatly appreciate it if you could take a look or take pictures. I have a 3.0 V6.

    Thanks!
     
  6. Brinker88

    Brinker88 Black sheep o' the family

  7. link works, but libray stopped allowing it's use shows too much useage and requires a local michigan ip address
     

Share This Page